Home » PG610-P Multi Gas Detector

PG610-P Multi Gas Detector

PG610-P Gas monitor (pump) is portable multi gas detector. 4 gases at most.

If gas concentration exceeds the preset alarm level, detector will start the sound-light alarm for explosion, fire and poisoning.

PG610-P Gas detector adopts built-in suction pump and uses electro chemical sensor or catalytic combustion sensor inside which has excellent sensitivity and good repeatability.

With 3.5 inch color LCD screen, 320 * 240 dot matrix, 256 screen colors, PG610-P Gas detector can display four gas concentration at the same time, can also be shown concentration change curve for one gas.
PG610-P Gas detector is widely used in oil exploration, oil and gas transportation, oil refining, metallurgy, power plants, chemical industry, oil depot and gas station, mine, tunnels, underground pipeline and other industries.


PG610-P Gas detector adopts large capacity data storage chip for historical data record, alarm data records, failure data records which is convenient for data statistics and management. Detector shows sensor calibration time.

PG610-P Gas detector uses graphical interface with English menu. With professional personnel’s guide, users can also set alarm level, screen color, screen brightness, suction pump flow rate, display mode, test mode, gas parameters and calibration. All operation needs password preventing wrong operation. Can be restored to factory settings.

PG610-P Gas detector uses large capacity lithium battery, with USB interface charger. Battery status real-time hint: battery current capacity, charging, full of power, low power etc. Connect detector to computer with USB data cable, user can set parameters read data records or derived record through the PC software.

Metal shell, strong compressive resistance, not easy to damage. Special leather bag, convenient to carry and use.

Technical parameters
Detecting Gascombustible gas, toxic gas, oxygen
Measuring Rangesee the chart
Sampling MethodBuilt-in pump suction
Working Temperature– 20 ℃ ~ + 50 ℃  
Working Humidity< 95% R.H. no condensation
Pressure range 70 ~ 150 kpa
Sensor lifesee the chart
Deviation≤± 3% F.S
Respond TimeT90 < 30 s 
ChargerInput 100V~240V AC,50/60HZ;Output 5V DC,1000mA
lithium batteryDC3.7V  DC, 3000 mAh
Charging Time6 h ~ 10 h
Working Time8 h to 16h (LEL, CO, O2, H2S 4 gas)
Alarm and fault prompt alarm way: buzzer, LED sound light alarm, display status
alarming frequency: low alarm 1 HZ, high alarm 2 HZ
Fault prompt: buzzer, LED sound light alarm, display status. Prompt frequency 0.5 Hz
DisplayDisplay screen: 3.5 inch color LCD screen, 256 screen colors, high resolution 320 * 240, adjustable brightness 8 class
Display mode: One-screen-multigas mode or One-screen-sinle-gas mode
Detection mode: in One-screen-multigas mode, user can select real time detection, STEL detection, or TWA detection.
Pumpcontrol mode: “pump” button on the panel: turn on or off.
Flow control: set the parameters to control pump suction flow rate 
Data storageIn total: four channels. each channel contains historical record, alarm record, fault record 
historical record: 1024 records per channel
alarm record record: 1024 records per channel
fault record: 1024 records per channel
Size and weight Detector size: 175 x 110 x 60 mm  weight: 1.2 kg 
Suitcase size: 355 (length) x 170 (width) x 130 mm (height) 
Total weight: 3.3 kg

                                            Gas Chart

NoGasMeasure rangeDeviationLow alarmHigh alarmSensor life
01Combustible gas0~100%LEL≤±3%20%LEL50%LEL3-5y
02O20~30%VOL≤±3%18.5%VOL23.%VOL2-3y
03CO0~1000ppm≤±3%50Pppm150ppm2-3y
04SO20~20ppm≤±3%2ppm5ppm2-3y
05NO20~20ppm≤±3%2ppm5ppm2-3y
06CL20~20ppm≤±3%2ppm5ppm2-3y
07H2S0~100ppm≤±3%10ppm15ppm2-3y
08NH30~100ppm≤±3%25ppm50ppm2-3y
09H20~1000ppm≤±3%50ppm200ppm2-3y
10O30~5ppm≤±3%0.5ppm1ppm2-3y
11NO0~100ppm≤±3%35ppm50ppm2-3y
12HCL0~20ppm≤±3%3ppm5ppm2-3y
13PH30~20ppm≤±3%1ppm3ppm2-3y
14HCN0~50ppm≤±3%5ppm10ppm2-3y
15ETO0~100ppm≤±3%20ppm50ppm2-3y
As for unlisted detected gas and measuring range, please contact with our company